Using Automatic Needle Threader - Singer 7285Q Manuel D'instruction

USING AUTOMATIC NEEDLE THREADER

Raise the needle to its highest position by rotating the hand
wheel towards you (counter-clockwise).
1. Hook thread into thread guide as illustrated.
2. Pull down lever while holding the end of thread.
3. Rotate the lever to the rear of the machine.
4. Guide thread into hooked end and pull the thread upward.
5. Return the lever and needle will be threaded automatically.
6. Release the lever and pull thread away from you.
NOTE: For smooth threading it is recommended you
set the machine for straight stitch when using the
needle threader.
1
4
22
2
5
3
6