Programmed Maintenance; Recommended Brushes - Tornado BD 20/11T Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PROGRAMMED MAINTENANCE

INTERVENTION
RECOVERY TANK CLEANING
SUCTION FILTER CLEANING
SOLUTION TANK FILTER CLEANING
BRUSH/ES CLEANING
BRUSH/ES DISASSEMBLY
SQUEEGEE CLEANING
FRONT SQUEEGEE RUBBER REPLACEMENT
REAR SQUEEGEE RUBBER REPLACEMENT
SPLASH GUARD RUBBER REPLACEMENT
SQUEEGEE ADJUSTMENT CHECK
SQUEEGEE HOSE CLEANING
SOLUTION TANK CLEANING
BATTERIES ELECTROLYTE CHECK
TRACTION MOTOR CHECK
BRUSH/ES MOTOR CHECK
SUCTION MOTOR CHECK
BRUSHES BASE GROUP CHECK
SCREW TIGHTENING
* The hours refer to the ones indicated on the display (see under paragraph "HOUR METER").

RECOMMENDED BRUSHES

Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
NYLON
TYNEX
BRISTLES THICKNESS Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
PAD HOLDER
MACHINE
CODE
BD 20/11T
48902010
48902020
48902030
48902040
48902050
48902060
48802010
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 50°C. It is not hygro-
scopic.
Excellent wear resistance, even with hot water. It is hygroscopic.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor
or ruin the polishing.
On irregular floors with deep joints or relieves, it is recommended to use softer bristles which
penetrate more easily and deeper. Please be aware that when brushes bristles are worn out
and therefore too small, they become rigid and unable to penetrate and clean deeper. This
may also happen with thicker bristles creating brush vibration.
Pad holder is recommended to clean smooth surfaces. It has anchor points which permit the
blocking of the abrasive pad during work.
QTY DESCRIPTION
1
PPL 0,3
1
PPL 0,7
1
PPL 0,9
1
TYNEX
1
PPL 0,6
1
5-mix
1
Pad holder
DAILY 20 HOURS 200 HOURS 1000 HOURS
*
*
*
*
*
USE
Irregular floors with large joints.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
Normal floors.
For all types of floors
center lock green For pads of 20", for smooth surfaces cleaning.
*
*
*
*
*
*
*
*
*
*
*
*
*

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

99680t

Table des Matières