Operating The Radio; Sleep Mode - König Electronic HAV-CR26BL Mode D'emploi

key [6] to set hour. Adjust minutes by pressing ◄► the tuning key [1]. Press alarm key [6] to set
minutes. The LCD display will show an "alarm" icon and the alarm time in its upper left corner.
2. If the alarm is set, the LCD display will show the alarm time. Pressing the time key [5] will display
the time on the LCD for 5 seconds. If the alarm is not set, the LCD will show the time.
3. The alarm can wake you by either radio or buzzer. Use the alarm mode slide switch [11] on the
back to toggle between "alarm to buzzer" and "alarm to radio".
4. Press the snooze button if you wish to suspend the alarm by 10 minutes.
5. For "alarm to radio", the radio will turn on for 5 minutes.
- Press alarm key [6] to turn off radio.
- Press snooze key [3] to suspend radio for 10 minutes.
6. For "alarm to buzzer", the buzzer sound will turn on for 1 minute.
- Press alarm key [6] to turn off the buzzer.
- Press snooze key [3] to suspend buzzer for 10 minutes.
6. TURN ON NIGHT LIGHT
Turn on the night light by turning the backlight dimmer knob [9] clockwise for the desired brightness.
When the backlight dimmer knob is turned fully counterclockwise, the light is switched off.

7. OPERATING THE RADIO

1. Press the radio on/off button [4] to turn on.
2. Choose an FM station by using ◄► the tuning key [1]. The frequency will be shown on the LCD
display. If the alarm is set, the LCD display will toggle between alarm time and radio frequency
every 3 seconds.
3. Adjust the volume turning the +/- on the VOL key [2]. The volume level will be shown on the LCD
display for 3 seconds after adjustment is made.
4. Press the radio on/off button [4] again to turn the radio off.

8. SLEEP MODE

Sleep mode will play the radio for a set time and then automatically switch off. The duration of sleep
mode is set using the sleep time switch [12] on the back of the unit. The options are 30, 60 or 90
minutes. To activate the sleep mode, first switch the radio on, using the on/off key [4]. Then press and
hold the snooze/sleep key [3] for 2 seconds. This will activate the sleep function. The LCD display will
alternate for 3 seconds showing the minutes remaining in sleep mode and the time. If the alarm is set,
the LCD display will alternate for 3 seconds showing sleep time remaining and the alarm time. The
sleep function can be ended by pressing and holding the snooze/sleep key [3] for 2 seconds.
9. AUTO SYNCHRONIZATION
In rare instances the flip clock may advance two minute 'cards' simultaneously or fail to advance a minute
'card'. The clock radio has a built-in auto synchronization function to correct this. After the digital clock and
flip clock have been manually synchronized (see above: setting and synchronizing the time), the flip clock
will automatically be synchronized to the digital clock every 24 hours (at 0.00 hr). If the flip clock is running
slow, the digital clock will automatically advance the flip display (up to five flips/minutes). If the flip clock is
running fast, the digital clock will automatically postpone the movement of flips (up to five flips/minutes).
The alarm function is controlled by the digital clock and is not affected by any inconsistency between the
flip clock display and the digital clock.
IMPROVING RECEPTION
Rotate the unit horizontally for optimum reception. A loop antenna for FM reception is built into the unit.
Do not put the unit near electrical appliances such as TV's, DVD-players, etc. to avoid unwanted
electromagnetic interference.
4