HENGBO SC-505A Manuel D'utilisation page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

and power function like a cooker, make it be a popular and optimal barbecue grill in the family
and similar place.
4
User Guide
1. Before first using this product, please read this instruction carefully to avoid the
decrease of
product's life or causing injury.
2. Before first using this product, please clean the baking pan, hand dish and other parts.
3. The product must be placed on the solid platform, where there is resistant to high
temperatures and dry. Kindly note that don't place the product on the glass table directly or
near inflammable materials.
4. When power on, please use qualified three-line power socket, which is with reliable
grounding
and the limit load carried capacity should be more than 10A/220VAC.
5. Before first using this product, please turn switch to the right until the highest position,
and
preheat for three minutes. Some odor will emit from the heater 's surface, which is normal.
And then use the product for barbecue.
6. When the indicator light, the product is being heated, and the temperature can be
adjusted from low to high.
7. After heating, you can put the meat on the frying pan and turn over the food for heating
evenly. You can also put your favorite food on the hand dish, and bake on the lower layer.
8. When using the non-stick coating baking pan or hand dish, please use small wooden
spatulas
or wooden utensils to turn the food, or the coating surface maybe damaged easily.
9. When using the product, please don't add over-strong ingredient, because it will bake
delicious food even only add salt. Before barbecue, please make sure the food and the
ingredient mixed well.
10. When frying and baking the food, please reduce the water in the food to avoid the
splash caused by oil and water boiling.
11. For the food which is not easy to turn or delicate after cooking, for example , you can
put stinky tofu or fish slice on the hand dish and then start to barbecue.
12. Before the product being cooled down completely, please don't touch the metal parts
of the product to avoid being scalding.
[1]Due to different models, the products are a little
different. Please refer to the actual product.
5

Publicité

Table des Matières
loading

Table des Matières