ready2music HYDRIX Mode D'emploi page 13

Pairing
Manual pairing procedure
1 Press and hold the button to switch the speaker on.
The blue LED starts to flash and you will hear a sound.
(„ding-dong").
2 Activate the Bluetooth function
of your smartphone, computer,
tablet etc.
3 Open the Bluetooth connection
menu of your smartphone or
computer.
4 Search/scan for available devices and choose „R2M HYDRIX"
from the list. (If prompted, insert the code „0000")
5 After successful pairing you will hear a sound
(„ding-dong-ding") and the blue LED starts to glow
constantly.
R2M HY
R2M HYDRIX
Disconnect Bluetooth manually
If speaker and smartphone/tablet are connected, you
can disconnect through pressing the
LED starts to flash and the speaker changes into the
Bluetooth search mode. Now you can execute the step
„Manual pairing procedure" to reconnect.
Manually connect with last device
If the Bluetooth connection was interrupted, you can
reconnect with the last connected device through
pressing the button.
Automatic connection with last device
If the speaker is switched on, it will automatically
connect with the last connected smartphone/tablet.
button. The blue