Publicité
Conformity declaration
ENG
Orno-Logistic Sp. z o.o. declares that this OR-GB-426 product is in conformity with the 2014/53/EU Directive.
Deklaracja zgodności
PL
Orno-Logistic Sp. z o.o. oświadcza, że produkt OR-GB-426 jest zgodny z dyrektywą 2014/53/UE
Konformitätserklärung
DE
Orno-Logistic Sp. z o.o. erklärt, dass das Produkt OR-GB-426 mit der Richtlinie 2014/53/EU konform ist.
Déclaration de conformité
FR
Orno-Logistic Sp. o.o. déclare que le produit OR-GB-426 est conforme à la directive 2014/53 / UE
Декларация соответствия
RU
ООО «Orno-Logistic Sp. z o.o.» заявляет, что изделие OR-GB-426 соответствует директиве 2014/53/UE.
01/2017
(ENG) Radiocontroller (radio link)
The easy to assembly device designed for wireless control of operation of electrical appliances, among others electric door openers, gates, lighting, etc., using the
remote control unit. The receiver works with 30 remote control units and operates in three modes depending on setting.
Power supply:
Frequency:
Relay output
Open area range:
Net weight:
Programming of additional remote control units
1.
Press the joint key and hold it for about 3 s.
2.
The receiver will enter the transmitter programming mode.
3.
Within 30 s, press and hold the unlock key on the remote control unit to be
paired.
4.
The correct pairing will be confirmed by the LED flashing on the receiver.
5.
When the LED on the receiver goes out, release the key on the remote control
unit.
MODES OF OPERATION
The receiver has 3 modes of operation that can be set by means of jumper configuration (after the top cover is removed).
1.
Time mode (3S)
After pressing the enter key on the remote control
unit, the relay activates for 3 seconds.
INTENDED USE OF THE PRODUCT:
TECHNICAL SPECIFICATION:
receiver: 12VDC
remote (transmitter): 1xCR2032 (batteries included)
433MHz
NO/COM/NC, max. 3A
max. 50 m
0,073 kg (remote: 0,03 kg)
OPERATION
To cancel all transmitters (remote control units) from the receiver memory,
press the joint key on the receiver and hold it for about 8 s. When the LED on
the receiver goes out, this means that all remote control units have been
cancelled from the memory.
2.
Bistable mode (L)
After pressing the unlock key on the remote control
unit, the relay remains active until the lock key is
pressed.
2
Fig. 1 Description of the device
Abb. 1. Gerätebeschreibung
Image 1 Description de l'appareil
Рис. 1 Описание устройства
Cancellation of the receiver memory
3.
Monostable mode (M)
The relay remains active as long as the unlock key is
pressed on the remote control unit.
Rys. 1 Opis urządzenia
Fig. 2 Dimension
Rys. 2 Wymiary
Abb. 2 Ausmasse
Image 2 Dimensions
Рис. 2 Размеры
Publicité
