Before First Use - KORONA electric 59010 Mode D'emploi

Before First Use

Remove
appliance is complete.
Fully unwind the power cord (8) and connect the appliance to a
properly installed wall socket.
The
protective layers on the heating elements, heat up the hotplates
for about 5 minutes on the highest setting without any pot
on it. This process seals the hotplates and assures a better
protection against corrosion in the future.
This could cause a slight build-up of smoke and odour. This
doesn't cause any harm nor does it mean that your appliance
does not work properly. Make sure that the room is well
ventilated!
After this process your hotplates are ready for operation.
Warning: Plastic bags are a danger to toddlers and
babies, therefore keep them away to avoid suffocation.
Operation
The temperature of accessible surfaces may be high
during operation. Therefore, do not touch the appliance
during and/or immediately after operation.
1. P lace the appliance on an even and heat-resistant surface.
Do not place it on top of a metal surface.
2. F ill the foods which you wish to reheat in a pot/pan and
place it in the middle of the hotplate (2/5). Make sure that
there are no foreign objects on the hotplate (2/5), e.g. food
leftovers, water.
16
all packaging material and check whether the
hotplates have a protective coating. To remove the