Ec Declaration Of Conformity - AEG BGE18 Notice Originale

EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under "Technical Data" fulfi lls all the relevant
provisions of the directives 2011/65/EU (RoHS), 2014/30/
EU, 2006/42/EC, 2000/14/EC, 2005/88/EC and the following
standards have been used:
EN 60335-1:2012+A11:2014+A13:2017
EN 50636-2-100:2014
EN 55014-1:2017
EN 55014-2:2015
EN 62233:2008
EN IEC 63000:2018
Measured sound power level: 94,5 dB(A)
Guaranteed sound power level: 97 dB(A).
Conformity assessment procedure according 2000/14/EC to
Annex V.
Winnenden, 2019-05-13
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, after use, the battery packs have
to be fully charged.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without
further requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to be
carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
16 ENGLISH
MAINTENANCE
Keep all nuts, bolts and screws tight to be sure that the
machine is in safe working condition.
Examine the machine and replace worn or damaged parts
for safety.
Use only AEG accessories and AEG spare parts. Should
components need to be replaced which have not been
described, please contact one of our AEG service agents
(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before
starting the machine.
Remove the battery pack before starting any
work on the machine.
Always wear goggles when using the machine.
Wear ear protectors!
Wear dust mask.
Keep bystanders a safe distance away from the
machine.
Do not use in the rain or leave outdoors while it is
raining.
Do not dispose electric tools, batteries/
rechargeable batteries together with household
waste material.
Electric tools and batteries that have reached the
end of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
The guaranteed sound power level shown on this
label is 97 dB.
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH 17