Cleaning And Maintenance - Bestron ASMS600 Mode D'emploi

WARNING:
• Never turn on the appliance if it isn't in the bowl/saucepan/mixing beaker. Otherwise, the sharp knife may
cause serious injury.
• The appliance may not be used for more than one minute at a time. The appliance needs to cool down to
room temperature.
OPERATION - Chopper attachment
The chopper attachment is perfectly suited for chopping/cutting meat, cheese, onions, herbs, garlic, carrots,
walnuts, hazelnuts, almonds, dried prunes etc.
1. Fit the stainless steel blade (11) onto the mounting pin (13) in the mixing-cup (12).
2. Attach the motor unit into the lid (10) and turn the parts to the left until it clicks in place (see fig. 2 and
fig. 3).
3. Fill the mixing-cup with the ingredients and press the lid onto the mixing-cup.
4. Switch on the appliance by pressing one of the two pulse buttons. Use the adjustable speed controller
in combination with pulse-button (I). First press pulse button (I), and use the adjustable speed controller
by turning it to the left or right to determine the speed. For mixing on the highest speed, the pulse button
(II) with turbofunction can be used.
5. Keep hold of the mixing-cup during use so that it cannot slide off the work surface.
6. The appliance shuts off automatically when the pulse button is released.
7. Remove the plug from the wall socket when finished.
8. Remove the lid from the mixing-cup and carefully lift the stainless steel blade from the mixing-cup.
9. Scoop the processed food from the mixing-cup.
WARNING:
• Do not chop extremely hard food, such as ice cubes, nutmeg, coffee beans, and grains.
• Pre-cut meat, cheese, onions, garlic, carrots and chilli's before chopping. Remove stalks from herbs and
un-shell nuts and remove bones, tendons and gristle from meet.
OPERATION - Whisk attachment
The whisk attachment can be used to beat/mix egg white, whipped cream, mayonnaise, pudding, purée,
and light types of dough etc.
1. Fit the motor unit onto the whisk attachment, and lock the parts by turning one part to the left. Keep
turning until it clicks (see fig. 2 and fig. 3).
2. Place the ingredients in a bowl, saucepan or the provided mixing-cup.
3. Insert the plug into the wall socket.
4. Keep the appliance upright in the bowl, saucepan or mixing-cup.
5. Switch on the appliance by pressing one of the two pulse buttons. Use the adjustable speed controller
in combination with pulse-button (I). First press pulse button (I), and use the adjustable speed controller
by turning it to the left or right to determine the speed. For mixing on the highest speed, the pulse button
(II) with turbofunction can be used.
6. Keep hold of the bowl/saucepan/mixing-cup during use so that it cannot slide off the work surface.
7. The appliance shuts off automatically when the pulse button is released.
8. Remove the plug from the wall socket when finished.

CLEANING AND MAINTENANCE

1. Remove the plug from the wall socket.
2. Allow the appliance to cool down sufficiently before cleaning it.
3. The stickmixer can be cleaned using running tap water. Rinse the stickmixer with plenty of water and dry
it thoroughly.
4. Clean the appliance's motorunit with a damp cloth. After cleaning, dry the unit thoroughly.
5. Store the appliance.
WARNING:
• Be careful with the sharp knife during cleaning.
• Verify that the appliance is not connected to the power supply before you clean it.
• Clean the mixing stick each time after use.
25
EN