Troubleshooting Guide - XPower FC-125B. FC-150B Manuel D'emploi

Troubleshooting Guide

PROBLEM
Air Circulator does
not start
Unit runs but the
speed or the sound
is abnormal
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
English - 10
POSSIBLE CAUSE
No electricity.
The power cord is not properly
plugged in.
The timer switch is set to "0"
position.
Battery is not activated yet.
Low battery capacity.
Air inlet or air outlet is blocked.
Low battery capacity.
SOLUTION
Check for power supply.
Remove and reconnect the
power cord.
Set the timer switch to "ON"
position.
Please charge the battery
until to activate the battery
before the first usage.
When the battery capacity
is 20% or lower, in order to
protect the battery, the preset
program will stop the machine
and prohibit the machine from
working again. (See Page 5:
Charge the Battery.)
Remove blockage.
When the battery capacity
is 20% or lower, in order to
protect the battery, the preset
program will stop the machine
and prohibit the machine from
working again. (See Page 5:
Charge the Battery.)