Naturalife Fresh Water Spray Bidet Guide D'installation page 3

Installation Guide
EN
DE
FR
Fit
ES
IT
Fit
Seat
1. Remove the toilet 2. Place the bidet on
seat by unscrewing the the toilet. Align the
two back screws. seat coupling holes
with the back screw
holes.
2
Does Not Fit
Does Not Fit
Seat
Seat
3. Screw the seat back
onto the toilet bowl,
threading the screws
through the seat
coupling holes.
Home Flexible Hose
Valve
(Cold Water)
4. Shut off the water supply and then disconnect the home flexible hose
from the water supply.
Adapter
Home Flexible Hose
Adapter
Water Supply
5. Connect the adapter 6. Connect the home
to the water supply flexible hose to the
valve. adapter.
Water Inlet
Stainless Steel Hose
Stainless Steel Hose
Adapter
7. Connect the
stainless steel hose to
the adapter.
8. Connect the other end of the
stainless steel hose to the bidet's
cold water inlet.
IMPORTANT: All connections
must be tight to prevent water
leakage. If any leaking occurs, turn
off the water supply and unscrew
the connections. Wait until the
connections are dry and screw
together tightly again.
3
EN
DE
FR
ES
IT