Mounting Unit - Panasonic AJ-HVF21G Mode D'emploi

For cameras compatible with the mounting unit
The standard slide rail can be removed and replaced with the mounting unit (VYQ1818).
To purchase the mounting unit, consult your dealer while bearing in mind that this unit is a
repair part.
The following cameras support the mounting unit.
O Changing from the slide rail to the mounting unit
1.
Detach the two screws, then detach the
standard slide rail.
2.
Secure the mounting unit in place with the two
screws.
E-9
Viewfinder model number
AJ-HVF21G
AJ-HVF27BG
Camera model number
AJ-HDC20A
AJ-HDC20AP
AJ-HDC27F
AJ-HDC27FP
AJ-HDC27FE
AJ-HDC27FMC
Screws
Screws
Slide rail

Mounting unit