Cleaning And Maintenance - Ceado SL98 Manuel D'utilisation

20

CLEANING AND MAINTENANCE

Partial cleaning
By keeping the appliance well-cleaned and in working order you can maximize the quality of the
juice extracted and guarantee a longer life for the appliance
frequently between operations. Do not allow juice to dry on juicer parts. To give the juicer a partial
cleaning:
1
Unplug the juicer.
2
Remove all pulp and seeds from the cone, splash retainer (automatic model), reamer, strainer
and container.
For the automatic model, to obtain a higher yield of juice always control that the strainer is well-
cleaned by using a nylon brush. Put the strainer under running water and use the brush to clean
the inside of the strainer (see Fig. 5).
3
Wipe all parts with a clean damp cloth.
Full cleaning
1
Unplug the juicer.
2
Remove the following parts from the base:
Automatic model SL98 (Fig. 3 and Fig. 6)
- Remove the cone and the splash cover by unscrewing the cone. Remove splash retainer,
reamer-strainer and container.
Semi-automatic model S98 (Fig. 3)
- Remove the splash cover, reamer, strainer and container.
3
Remove all pulp and seeds from the removed parts.
itself. The juicer should be cleaned
GB
Fig. 5