Télécharger Imprimer la page

LENCO BMC-080 Mode D'emploi page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

K. Trouble Shooting
Not On
No sound
Noises when
singing and
recording
No response
L. Specification
Unit Dimension
Unit Weight
Bluetooth
Built-In Battery
Power Source
Input
Audio
Operating
Temperature
M. Guarantee
Lenco offers service and warranty in accordance with the European law,
which means that in case of repairs (both during and after the warranty
period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to
Lenco directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
• Check battery is it charged with enough energy.
• Check whether volume level is in lower position on your
device and mobile phone or PC/Mac.
• Make sure that your Bluetooth device is within the
effective operation range.
• Check whether the Bluetooth device is paired.
• Check if you have selected the correct audio source.
• If using AUX IN port, be sure the aux-in cable is securely
inserted into the microphone and your device.
• Adjust the distance between mobile and microphone to
avoid signal interference.
• Turn off and restart the device.
74 mm (L) x 73 mm (W) x 248 mm (H)
450g (approximate)
Specification
Supported Profile
Connection Distance
Lithium 3.7V 2000mA
Playing Time: Up to 10 hours (at 60% volume under
karaoke mode)
Micro USB Port
PC's USB port Power or DC 5V, 1A
Output Power
Freq.
Responses:
0 to 40°C
V4.1
A2DP, AVRCP, HSP
In 10 meters (open area)
2 x 3W RMS
80Hz ~ 20000Hz
10

Publicité

loading