Functions; Connecting To The Computer - König Electronic CMP-DIGCHAIN13 Mode D'emploi

Operating instructions:
Battery:
Before using the device for the first time, charge it by connecting it to the computer via a USB cable. The
battery needs to be charged for about five (5) hours initially. The standard charging time is three (3) hours.

Functions:

M menu button. Press and hold to power on/off.

Press and hold to display the menu functions, when in the menu you can press it to select OK.
Select to move up/down in the browser

Picture browsing mode:
The picture browsing mode will turn on by default when the power is switched on.
Time/calendar display mode:
When in picture browsing mode, press the menu key to enter the main menu. Then go to "display clock"
and press the OK button. Here you can select if you want to see a digital clock, an analogue clock or the
calendar. You can set the clock when you go to "set clock" in the menu.

Connecting to the computer:

Connect CMP-DIGCHAIN13 to a computer with the USB cable. Select the "USB connect" option in the menu.
Choose "YES". When it displays "USB connect", the download dialog box "DPFMate" will automatically pop
up on the computer screen. In the program you can change your pictures on the device. See the functions of
the software in the picture below.
ENGLISH
2