Télécharger Imprimer la page

Jaeger 16060552 Instructions De Montage page 12

Publicité

Optional: Adapter socket 62400001
7-pin
29
31
Anhängerbetrieb konfigurieren / Set up trailer operation
FDRS Onlinecodierung bitte wie folgt
durchführen:
• Mit FordEtis verbinden
• Händleranmeldung
• Fahrzeug : VIN eingeben
• Fahrzeugsoftware
• Änderungen und Aufrüstungen
• Konfiguration der Anhängerkupplung
Sind folgende Steuergeräte / Funktionen verbaut,
müssen diese manuell auf Anhängerbetrieb
konfiguriert werden:
• PAM
• SODR
• SODL
• FCDIM
Favore codifica online FDRS effettuate come
segue::
• Collegare con FordEtis
• registrazione rivenditore
• Veicolo : digitare VIN
• software veicolo
• Modifiche e aggiornamenti
• Configurazione del gancio di traino
Se sono installate le seguenti centraline / funzioni,
devono essere configurati manualmente sul
funzionamento del rimorchio:
• PAM
• SODR
• SODL
• FCDIM
33
/
87061047/06.10.2015
Seite 12/13 / © JAEGER automotive GmbH / Chromstrasse 90 / D-33415 Verl / FON: +49 5246-9210-0 / FAX: +49 5246-9210-20 /e-mail: info@jaeger-automotive.de
13-pin
P
P
Please effect FDRS online coding as follows:
• connect with FordEtis
• dealer registration
• Vehicle : enter VIN
• Vehicle software
• Changes and Upgrades
• Configuration of towbar
If the following control units / functions are installed,
they must be configured manually on trailer
operation:
• PAM
• SODR
• SODL
• FCDIM
Por favor de codificación FDRS online lleva a cabo
como sigue:
• Conectado con FordEtis
• registro de distribuidor
• Vehículo : introducir VIN
• Software vehículo
• cambios y actualizaciones
• Configuración del enganche de remolque
Si se instalan las siguientes unidades de control /
funciones, deben configurarse manualmente en
la operación de remolque:
• PAM
• SODR
• SODL
• FCDIM
30
32
Veuillez suivre le codage en ligne FDRS suivant:
• connecter FordEtis
• inscription de courtier
• Vehicule : Saisissez VIN
• logiciel de véhicule
• Modifications et mises à niveau
• Configuration de l'attelage de remorque
Si les unités de contrôle / fonctions suivants sont
installés, ils doivent être configurés manuellement
sur le fonctionnement de la remorque:
• PAM
• SODL
Gelieve FDRS online codering als volgt uitgevoer:
• met FordEtis verbinden
• dealer registratie
• Voertuig : schrijf VIN
• Voertuig software
• Veranderingen en upgrades
• Configuratie van de
aanhangerkoppeling
Als de volgende controle-eenheden / functies
worden geïnstalleerd, moeten ze worden
handmatig op de aanhangwagen geconfigureerd:
• PAM
• SODL
• SODR
• FCDIM
• SODR
• FCDIM

Publicité

loading

Ce manuel est également adapté pour:

21270556