Maintenance And Lubrication; Storage - Texas A/S Pro Trac 700 Mode D'emploi

Quick-release clutch (Quick-clutch).
If you often use different kinds of accessories it may be an advantage to invest in a seper-
ate clutch for each of the different accessories.
The quick-clutch is in two parts. One part is fitted onto the machine and the other is fitted
onto the accessory. The change of accessories is done by lifting a lever.

12. Maintenance and lubrication

Correct maintenance and lubrication prolongs the life of the machine.
The engine of your machine has a running-in period of 5 work hours. After 5 hours the
engine oil must be changed. After this the oil must be replaced for every 50 hours or at
least once a year. Always check the oil level before using the machine.
Check the gear oil for every 50 hours and change at least once a year. Use a 80/90 gear
oil.
If there are any signs of leakage or moist places the oil must be checked immediately.
The gear of the rotary tiller must also be checked for every 50 hours and changed once a
year. Use the same oil as for the gear box.

13. Storage

When the machine must be stored for a longer period you should do the following:
Gasoline engine:
 Empty the fuel tank and start the engine. The engine will stop when all fuel is used.
 Let the engine run warm.
 Remove the engine oil.
 Immediately fill with fresh engine oil.
 Remove the spark plug and pour a spoonful of engine oil into the engine. Pull the
starting cord 2-3 times.
 Fit the spark plug.
23