Technical Data - FAME BT 12A Manuel D'utilisation

Connections and Cabling
Use only fully functioning cables in perfect condition! Microphones can be connected
to the Mic-Input via XLR or 6.3mm Jack. Line signals can be connected to the Line-Input
via XLR or Cinch. The Line-Output can be connected via XLR or Jack.
Tipp! Connect your Smartphone comfortably via Bluetooth.
• Please ensure that the FAME BT A Speaker is switched OFF!
• Please ensure the Power Supply Voltage(12) matches the local mains voltage!
Warning: Connecting the speaker to the incorrect voltage my result in damage!
• Turn the Level Control Knob all the way to the left (counter-clockwise).
• Connect all relevant signal sources and ensure that they are powered on.
• Lastly switch ON the speaker power supply.
• Adjust the input and output levels to the desired settings and ensure that the
Peak LED (10) does not illuminate red (overload).
12
Operation

Technical Data

Modell BT 12A
Type 2-Way Loudspeaker with
Active Filter
Tweeter 3.5" Titanium Driver
Woofer 12" Diaphragm
Amp. Type Class AB
Frequency 50Hz - 20KHz
EQ 2-Band (80Hz, 12KHz)
Output RMS 180 Watt
Output Peak 500 Watt
USB Connection Yes
SD Connection Yes
Bluetooth Yes
FM Radio Yes
Remote Yes
Signal Mic: XLR/6,35mm Jack
Connections Line In: Cinch/XLR
Line Out: XLR/6,35mm Jack
Power Connection IEC
Power Cable included
Handles integrated
Stand Flange 35mm Flange
Wheels Yes
Housing PVC
Finish Black
Power Supply AC115V / AC230V
Dimensions 370mm x 585mm x 300mm
(WxHxD)
Weight 16,6Kg
BT 15A
2-Way Loudspeaker with
Active Filter
4.5" Titanium Driver
15" Diaphragm
Class AB
45Hz - 20KHz
2-Band (80Hz, 12KHz)
200 Watt
600 Watt
Yes
Yes
Yes
Yes
Yes
Mic: XLR/6,35mm Jack
Line In: Cinch/XLR
Line Out: XLR/6,35mm Jack
IEC
included
integrated
35mm Flange
Yes
PVC
Black
AC115V / AC230V
450mm x 710mm x 390mm
22,6Kg
13