DUNE BD Prime 3.0 Guide D'utilisation Rapide page 7

All manuals and user guides at all-guides.com
player if some drive is connected to the player and some write operation is in progress.
To put the player into the standby mode, press the "POWER" RC button. In the standby mode, the player
produces no signal on the video output, but is still functioning. For example, if you have some storage
devices connected to the player, you may still access them from network ("NAS" function of the player).
To exit the standby mode, press the "POWER" RC button again. Exiting the standby mode takes just a
few seconds. NOTE: When the player is in the standby mode, it still consumes signifi cant power. It is not
recommended to keep the player in the standby mode for a while if you do not need it.
Alternatively, you can confi gure the player to switch off completely when pressing the "POWER" RC button
(see "Miscellaneous / Advanced / POWER remote button" in the player setup menu).
NAS (Network Attached Storage)
You can access storage devices connected to the player from the local network using FTP and SMB pro-
tocols. On a Windows PC, just type "ftp://ip_address" or "\\ip_address" in the Windows explorer, where
"ip_address" is the IP address of the player.
WiFi
You can use a USB WiFi adapter to connect the player to the local network via WiFi.
Please see here for the information on supported USB WiFi adapters: http://dune-hd.com/support/hw_
compat/.
Internal 2.5" SATA HDD
A possibility to install the internal 2.5" SATA HDD may depend on your reseller. Please contact your local
reseller for more information.
Limitations
Compatibility of the player with a particular hardware (A/V equipment, network equipment, disk drives, etc)
may depend on various factors (particular hardware model, specifi cs of hardware installation and usage,
confi guration of the player and the hardware, etc). If the player does not correctly work with a particular
hardware, try to adjust the confi guration of the player or hardware, try to use the hardware in a different
way, or try to use some other hardware.
Compatibility of the player with a particular media content (fi les, discs, etc) may depend on various factors
(specifi cs of media content encoding, specifi cs of the confi guration of the player, etc). If the player does not
play correctly a particular media content, try to adjust the confi guration of the player, or try to use media
content encoded in a different way.
Updating Your Player and Getting More Information
Please check here for updated versions of player fi rmware (which may improve player functioning and
extend player possibilities): http://dune-hd.com/fi rmware/.
lease check here for more detailed and up-to-date documentation and information on player usage: http://
dune-hd.com/manuals/, http://dune-hd.com/support/.
7
English