Follow the instruction below for through washing.
(Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction)
Suivez les instructions ci-dessous pour laver la brosse.
(Ne plongez pas l'ensemble de la brosse dans l'eau, cela pourrait entraîner le dysfonctionnement du vibrateur.)
1
Pushing button
Appuyez sur le
bouton
4
Press the button on the
rear side of the vacuum
nozzle to separate the
bottom plate.
Appuyez sur le bouton à
l'arrière de la brosse pour
détacher la plaque
inférieure.
Straighten the punch bar on
the lower section.
Alignez la barre vibrante sur la
partie inférieure.
2
Punch bar
Barre vibrante
5
Combination
projection
Encoche
Wipe all the soiled parts
of the vacuum nozzle
body with a cloth.
Essuyez toutes les
parties sales de la
brosse à l'aide d'un
chiffon.
Insert the combination
projections on nozzle base to
the combination groove of
bottom plate.
Insérez les ergots de la plaque
inférieure dans les encoches
de la brosse.
3
Bottom plate
Plaque inférieure
Combination groove
Ergot
6
Punch bar
Barre vibrante
Wash the removed
bottom plate with water
and dry it.
Lavez la plaque
inférieure à l'eau et
séchez-la.
Bottom plate
Plaque inférieure
Push down the tabs to
secure.
Abaissez les
languettes pour fixer la
plaque.
17