Activating Water Filter Change Warning - Beko GNO163040X Mode D'emploi

Using the product
5.2. Activating water filter
change warning
(For products connected to the mains water
line and equipped with filter)
Water filter change warning is activated as follows:
1.
Within 60 seconds after switching on the
refrigerator, press and hold the Display and
Vacation buttons for 3 seconds.
2. Then enter 1-4-5-3 as password.
Confirming the entered
password
4
3
A
Selecting the
password numbers
2
1
22 / 34 EN
4
3
Enter 1-4-5-3 as follows:
Press FF set button for once.
Press FRZ set button for once.
Press FF set button for 4 times.
Press FRZ set button for once.
Press FF set button for 5 times.
Press FRZ set button for once.
Press FF set button for 3 times.
Press FRZ set button for once.
If the password is entered correctly, buzzer will sound
shortly and Filter Change Warning indicator will turn on.
Automatic filter usage time calculation is not enabled
ex factory.
It must be enabled in products equipped with a filter.
The refrigerator will give filter change warning with
6-month intervals automatically.
If the same procedure is repeated when the automatic
filter usage time calculation is enabled, then the
function will be canceled.
A
2
1
Refrigerator / User Guide