Télécharger Imprimer la page

Braun AB 325 Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
If the clock is not being set automatically (no reception),
it can be set manually.
Should contact to the radio signal be restored, the time
will automatically be adjusted according to the signal
received.
Setting the time manually
In the case of no reception during 10 minutes or if you
wish to set the time before reception, press the time
button (3).
– Press the time button repeatedly to move the minute
hand by minute steps.
– Keep the time button pressed down longer than 3
seconds to move the hands with increased speed.
With the next valid reception of the time signal, the time
will be adjusted automatically.
The clock may also be operated as a regular quartz
clock. If you press the time button (3) while inserting the
battery, the clock will work in its quartz mode and not
receive any radio signal. The display shows «--». Use
the time button to set the time. In order re-activate the
radio control feature, just remove the battery and insert
it again.
Alarm function
The alarm setting wheel (2) can only be turned in the
direction of the arrow.
The alarm function is activated by pressing the alarm
on/off bar (5).
The blue side of the alarm on/off bar is visible when the
alarm is activated.
Snooze/light function
When pressing the snooze/light button (4), the clock
face is illuminated for 8 seconds. When pressing it
while the alarm signal is given, the alarm is interrupted
and resumes after 8 minutes.
Battery check system
If the battery is running low, the light flashes and the
display (6) shows a flashing «bc». For a reliable alarm
function of the clock, you should insert a new battery.
As an additional safety precaution, the clock will
generate an error beep when you insert an empty
battery or if you activate the alarm function with a low-
charge battery inserted.
Changing the time zone
After a valid reception of the time signal, the time can
no longer be set manually. In this case, the time button
(3) can be used for changing the time zone.
When briefly pressing the time button, the display
shows «+1» (time zone for Germany: GMT + 1 hour).
8

Publicité

loading

Ce manuel est également adapté pour:

3833