Unpacking/Inspection; Unpacking And Inspection; Reporting Imperfections - RADIOEAR AP70 Instructions D'utilisation

2.

Unpacking/Inspection

2.1 Unpacking and inspection

Check Box and Contents for Damage
When the unit is received please check the shipping box for any rough handling or damage. If the box is damaged it should
be kept until the contents of the shipment have been checked mechanically and electrically. If the device is faulty, please
contact the nearest service office. Keep the shipping material for the carrier's inspection and insurance claim.
Store Carton for future Shipment
The unit comes in its own shipping carton which is specially designed for it. Please store this carton; it will be needed if the
device has to be returned for service. If service is required please contact your nearest sales and service office.
Contents of Shipment
As standard, this unit is delivered with the following:
Included parts

Reporting Imperfections:

Inspect before connection:
Prior to connecting the device to the Power Supply it should be inspected once more for damage. All of the cabinet and the
accessories should be checked visually for scratches and missing parts.
Report any faults immediately:
Any missing part or malfunction should be reported immediately to the supplier of the unit together with the invoice, serial
number and detailed report of the problem. In the back of this manual a "Return Report" can be found, where you can
describe the problem.
Please use "Return Report":
Please realize that if the service engineer does not know what the problem is to look for, he may not find it. Therefore using
the Return Record will be of great help to us and at the same time it is guaranteed that the correction to your problem will be
to satisfaction.
2.2 Imprtant Safety Instructions
Read these instructions
This device is specified to comply with the international standard IEC 60065
To avoid the risk of electric shock, this equipment must only be connected to a supply main with protective
earth."
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
AP70 Instructions for Use - English
Date: 2020/03
Mains Cable ID numbers!
Input cables
Speaker cables
Remote cable
Page 3/14