Operation - Fellowes AeraMax 290 Mode D'emploi

AUTOMATIC OPERATION
The unit is set to default to automatic
operation when it is first turned on. The air
purifier will automatically sense the amount
of impurities in the air, and adjust the fan
speed to keep your air purified.
MANUAL OPERATION
After you turn on the unit, you can switch to
manual operation by tapping the fan icon to
manually select fan speed.
• LOW, MEDIUM, OR hIGh SETTINGS
These levels are recommended for
standard daytime use. HIGH will activate
automatically when sensors detect poor
air quality.
MEDIUM
LOW
• TURBO
The TURBO level, the highest fan speed,
can be activated manually for maximum
air purification.
TURBO

OPERATION

AeraSmart™ SENSOR
Air quality indicator shows levels of air
quality.
Blue level indicates air is clean.
Amber level indicates air quality is poor.
Red level indicates high level of pollutants
in the air.
Aera+™ MODE
After you turn on the unit, you can
switch to Aera+™ mode by pressing the
Aera+™ mode icon (
to auto operation, press Aera+™ mode
icon (
HIGH
8
). To go back
) to turn off.