Infra-Red Remote Control - Imagilights NATURAL TEARDROP Mode D'emploi

INFRA-RED REMOTE CONTROL

ON ON OFF OFF
UP UP DOWN DOWN
RGB + WHITE RGB + WHITE RGB RGB
BRIGHTNESS BRIGHTNESS CANDLE MODE CANDLE MODE
COLOR LOCK COLOR LOCK
RECHARGING
The INDU-1 REGULAR CHARGER charges one single lamp and operates with the following adapter:
Input 100-240V AC~50/60 Hz - Output DC 7.5V 1.5A
Your lamp automatically turns off when placed on its charger plate. This to protect the long life of the battery and
to assure that charging and discharging is not done simultaneously. While the lamp is charging the indicator on the
charger will appear red. A green luminous indicator indicates the lamp is fully charged.
Charger plates are not standard included when purchasing a table lamp.
Lamp is useless without its specific prescribed IMAGILIGHTS® charger.
COLOR UP & DOWN: Choose between one of our 24 pre-programmed colors.
Start the 160.000 color mix mode 1 or 2 which will take approximately 14 minutes (=
ultra slow), and will continue without interruption.To fix a color, press the same button
again. To continue the cycle, press this same button again.
BRIGHTNESS: Shift through 4 different light intensity modes.
CANDLE MODE: Choose candle light mode 1 (yellow) or 2 (orange).
COLOR LOCK*: Press this button multiple times while aiming at your lamps to disable
the pushbuttons fuctions on the bottom of the lamps. To cancel the color lock
function turn off your lamp with the remote or place it back on the charger.
The remote operates on one Lithium battery CR2025 3V
*COLOR LOCK function depending on model/production
IP52
4