Alcad PDK-41500 Mode D'emploi page 15

DIGITAL DOOR ENTRY SYSTEMS
Operation
Configure the entrance panel of the external entry point as the external panel (E) (See page 28). Configure the entrance panel of each building
as the main panel (Leave the J1 jumper installed).
The function activating the electric lock from the external entrance panel remains enabled at all times.
SYSTEM ON STANDBY
The monitors are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a monitor is lifted,
an uninterrupted tone will be heard. It is possible to activate the monitor's auto switch-on system always providing that the system is not engaged.
SYSTEM ACTIVE.
Only the monitor whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance panel.
The call tone will be different for calls made from the panel of the external entry point and calls from the entrance panel of the building of flats.
If the handset of another monitor in the same building is picked up, intermittent tones will be heard and the auto switch-on function will not
operate. If the handset of the requested monitor is off the hook or if the code does not correspond to any monitor, the panel will emit intermittent
tones. When several monitors are installed in the flat, all of them receive the call. The first monitor to be answered will establish communication
with the the entrance panel.
Time setting to answer: At the external entry point; configurable (Position 7 from the configuration menu). In buildings inside the estate;
consult datasheet of the audio unit.
Maximum time setting for conversation: At the external entry point; configurable (Position 6 from the configuration menu). In buildings inside
the estate; consult datasheet of the audio unit.
During the answering and conversation periods, the panels of other buildings remain on standby until a call is made. If the call is made from
the external entry point, the panel display will show the code which has been entered. The entrance panel of the building where the monitor is
located remains deactivated (blocked).
.