AEG AXP26U338CW Manuel D'utilisation page 5

Masquer les pouces Voir aussi pour AXP26U338CW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Ensure the power supply used has an appropriate
voltage rating. Only use a 220 - 240V, 50Hz, 10A
mains electricity supply. Use of a power supply
with an improper voltage rating can result in
damage to the unit an possibly fire.
• Always use a anti-explosive circuit breaker or fuse
with the proper amp rating. Do not, under any
circumstances, use wire, pins or other objects
in place of a proper fuse.
• In the event of any abnormality with the air
conditioner (eg. a burning smell), do not pull out
the plug directly, open the window for ventilation
firstly, then turn the unit off and disconnect the
power supply.
CAUTION!
Warning for power supply cord
• This power plug must only be plugged into an
appropriate wall socket. Do not use in conjunction
with any extension cords.
• Push the power plug securely into the socket and
make sure it is not loose.
• Do not pull, deform. or modify the power supply
cord, or immerse it in water. Pulling or misuse of
the power supply cord can result in damage to the
unit and cause electrical shock.
• If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard. Use only the manufacturer specified
power cord for replacement.
• This appliance must be earthed. This appliance
is equipped with a cord having an earth wire.
The plug must be plugged into an outlet that is
properly installed and earthed. Do not under any
circumstances cut or remove the square earthed
pin (only for UK) from this plug.
ENGLISH
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Axp34u338cwAxp34u338hwAxp26u558hwAxp35u538cw

Table des Matières