Engel LE 3290 ATV Manuel D'utilisation page 78

OPERATING INSTRUCTIONS
2) Press
button to select what you want set.
3) Press OK to enter setting.
Press BACK to return to the previous menu. If the main menu is
displayed, pressing BACK will close the onscreen menu.
NETWORK
1. Press button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment OK button to save and return
to the previous menu.
CHANNEL
Channels – Display the scan sub-menu based on different Channel installation modes.
Channel installation mode – Select on-screen display
channel sources. You can select the signal type.
· Antenna – Set the signal type to antenna. When set to Antenna,the
TV can receive analog and digital (DVBT/T2) broadcasting signals.
· Cable – Set the signal type to cable. When set to Cable, the TV can
receive analog and QAM broadcasting signals
Auto Channel Update
Parental controls – Press
button to select the option then press
OK button to enter the sub-menu.
Audio Channel – Press
button to select the option then press OK
button to enter the sub-menu.
Open source licenses – Press
button to select the option then
press OK button to enter the sub-menu.
78