Before Calling For Service; List Of Options - Sharp RZ-X700F Série Manuel D'utilisation

BEFORE CALLING FOR SERVICE

The condition shown in the below left-hand column does not necessarily indicate
functional faults of the terminal. Please check the listed items at the right-hand column
"Checking" before calling for service.
The power indicator is not lit.

LIST OF OPTIONS

The following options are available for your POS terminal:
Do not try to install options yourself.
For details, contact your authorized SHARP dealer.
1.
Magnetic card reader model RZ-X6MR1
2.
2 line rear customer display model RZ-X6DP1
3.
LCD customer display model RZ-X6DP2
4.
Remote drawer models ER-03DW/04DW/05DW/03DWB4/05DWB5
5.
The ER-48CC3 till is used for the ER-03DW/03DWB4
6.
The ER-48CC2 till is used for the ER-04DW
7.
The ER-58CC till is used for the ER-05DW/05DWB5
8
Condition Checking
• Is AC power available at the electrical outlet?
• I s the AC plug of the AC/DC adapter
connected to the electrical outlet?
• I s the AC power cord disconnected or
loosely connected to the AC/DC Adapter?
• I s the AC adapters DC power cable
connected to the DC inlet Jack of the POS
terminal?
• I s the power switch of the terminal turned
"ON"?