Tangent Danmark spectrum X6 BT Mode D'emploi page 10

CONNECT A TURNTABLE
PhONO
(For use with a turntable without built-in phono pre-amp):
Slide the Phono / Line switch to phono position.
Connect the RCA L/R from your turntable to the RCA L/R inputs on the rear panel of
the Tangent Spectrum X6 BT.
Connect the ground wire from the turntable to the GND on the rear panel of the
Tangent Spectrum X6 BT.
Press AUX 1 on the Tangent Spectrum X6 BT remote.
SPECIFICATIONS
Speaker Type/Crossover:
Tweeter/Midrange/Woofer:
Amplifier power:
Sensitivity:
Frequency response:
Amplifier type/AC Power:
Input Connections:
Cabinet finish:
Cabinet(WxDxH)mm:
Net weight (Kg):
AUDIO
L
Powered Speaker
1" / 2x5"
2x60W
90dB
50Hz-20kHz
Class-D / AC100-240V/50-60Hz
Bluetooth/jack 3.5/Line RCA/Optical/Coaxial/Phono
Black matt or White matt painting
166 x268 x 923mm
13,5 kg / unit
R
PHONO
GND