English; Getting Started; Other Functions - Electrolux EKM3 Série Mode D'emploi

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Motor head (tiltable)
B. Speed selector
C. Housing
D. Tilt head locking button
E. Front attachment hub
F. Front attachment hub release button
G. Rear attachment hub cover
H. Attachment shaft
I. Stainless steel bowl
J. Bowl locking plate
K. Non-slip feet
Picture page 2-3

GETTING STARTED

1
Before using your appliance for the first time: Remove all packing material such as plastics, labels, stickers or
tags that may be attached to the housing, bowls or attachments.
Clean the appliance and accessories, see instructions: "Cleaning and Care".
2
Place the appliance on a flat surface. Push the tilt head locking button with one hand and tilt the motor head
up with the other hand. Once in up position it locks.
Caution! Ensure that the power cord is unplugged.
3
Set the speed selector to "0". Place the stainless steel bowl on the bowl locking plate. Rotate the bowl clockwise
to lock it into position.
Warning: Never operate the appliance with the wire whip, flat beater or dough hook unless the bowl is in place.
4
Place an attachment on the attachment shaft: Align the slot at the top of the attachment with the pin on the
attachment shaft. Push attachment up and turn it clockwise until the pin is locked into position.
To remove attachment, move it counterclockwise and pull off.
5
Tilt the head with the attachment to lock into position: Push the tilt head locking button with one hand and
tilt the motor head down with the other hand. Insert the plug in the main socket. Place the pouring shield on
top of the bowl by making the tool pass through the opening of the pouring shield. Rotate the pouring shield to
suit the preferred position of use. Use the chute to reduce the spillage of ingredients. Connect the chute to the
pouring shield using the hooks on the chute.
Warning: Keep fingers and hands away from areas with movable parts.
6
Move the speed selector from "0" to desired speed (1-6). Once mixing is complete, turn the speed selector to
"0" and unplug the appliance.
7
If the appliance is unplugged and the speed selector is left in speed mode (1-6):
The appliance will not start automatically. Turn the speed selector to "0", then turn it to the desired speed.

OTHER FUNCTIONS

8
Attachment hub: The appliance has with two built in multi-purpose attachment hubs, one in the front (A) and
one in the back (B). Read and carefully follow the instructions that comes with each attachment for correct and
safe use.
HOW TO USE THE MEAT GRINDER*
9
Insert the grind screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at the end of
the grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the ring (E) by hand until
the meat grinder is secured.
Note: Do not over tighten the ring.
6
L. Power cord
M. Wire whip
N. Coated flat beater
O. Coated dough hook
P. Slicer/Shredder *
Q. Meat grinder *
R. Blender*
S. Blender lid with measuring cup *
T. Transparent pouring shield
U. Transparent chute
* Certain models only
www.electrolux.com