Device Description - Evolite Infinium 25 000 Rgb Fb4 Mode D'emploi

 Introduction
Thank you for selecting this professional fixture from evolite.
This new LASER will provide you reliability, latest features, and professional lighting effects for a long period of
time.
This evolite fixture is complying with European standards: EN60825-1:2014, application of the European
Directives :
 Directive LVD n°2006/95/CE
 Directive RoHS 2 n°2011/65/UE
 Directive EMC n°2014/30/EU


Device description

Features
- Pure Diode
- Sources:
- Red 638nm 7000mW
- Green 520nm 7000mW
- Blue 445nm 12000mW
- Total power: 25 000mW
- Extremely low divergence: <1.2mrad
- Beam size: 6x5 mm
- RGB modulation: 0~5V, analog <50Khz
- Scan mirror size X: 11x11x1.05mm
- Scan mirror size Y: 9x16.5x1.05mm
- Max projection angle of: 60 °
- Analog Modulation
- Class 4
- Buttons for adjusting the light intensity of each source on the rear panel
- Control modes via the FB4 Pangolin box included: Programs integrated, ILDA, SD card, Ethernet, DMX512 -
LASER output LED on the front panel
- Scan System GT50 35 kpps @ 8 °
- Interface ILDA in & out
- "Scan Fail Safety" system that automatically switches off the LASER in the event of mirror motor failure.
- Interlock connector for remote shutdown button (optional)
- Safety key for locking ignition of LASER
- Supply voltage: AC100-240V 50 / 60Hz
- 2-part enclosure for protection dust-sensitive components (ATS Technology)
- LASER dimensions only : 488x308x245 mm
- Net weight: 32 kg
The Infinium Series from EVOLITE benefit from the ATS Technology, to prevent dust and fog inside the fixture. This
advanced cooling system ensure full power of the LASER light for long term.
Infinium 25 000 RGB FB4 User Manual Ver. 1.00 Page 12