Num'axes NGPIEACC038 Guide D'utilisation page 18

cable into the external power port of your NUM'AXES trail
camera. Press the solar panel ON/OFF button to switch it
on.
If the internal battery of the solar panel is charged, the
camera will be immediately powered.
It is strongly recommended that the batteries be installed
inside the camera even when connected to the solar panel.
Otherwise, the camera may stop operating due to power
shortage. During intensive use of the camera, the solar
panel internal battery may not be charged fast enough, and
therefore, it is recommended to equip the camera with
batteries for optimal performance.
•
Charging the built-in battery
It's important to completely charge the built-in battery
before using the solar panel. We strongly encourage you to
charge it upon purchase.
‒ Solar charging
For best results, place the solar panel in direct sunlight. The
sunlight quality plays a key role in determining the speed of
charge. Cloudy days will increase the time needed to charge
the built-in battery. The brighter the sunlight, the faster the
charge.
Guide panneau solaire 12 V – Ind. A – Octobre 2020 18/60