TFK quickfix Notice D'utilisation page 10

Fig. II:
For extra stability, the Quick fix carrycot is secured on the Buggster
with a belt at the back of the carrycot. To do this, use the rivet (3) to
attach the strap supplied with the buggy to the Quick fix carrycot
and the central folding joint (4) of the Buggster.
Fig. III:
The Quick fix carrycot is carried by the carry handle (5). Make sure
the handle is properly engaged by pushing it forwards.
Fig. IV:
To fold up the hood, you must press the red button (6) on the outside
of the adjustable hinge. You can then retract the carry handle (5).
There is an integrated ventilation window (7) in the rear section of the
hood, which can be opened by simply unzipping and folded
upwards.
Fig. V:
The foot guard is simply stretched across the frame with the elastic
band and attached to the front of the handle with the two press
studs (8).
The sun shade is stretched over the carry handle (5) with the elastic
band and attached to the two press studs (9). This is a double press
stud which also allows the hood to be attached.