Messages D'erreur - Ravas SafeLoad Manuel D'installation

8.

Messages d'erreur

8.1 Messages d'erreur
Error Logging
message number
Err01 1
Err04 4
Err06 6
Err11 11
Err13 13
Err14 14
Err15 15
Err16 16
OiLPr 90
tLtSE 91
‐‐‐‐‐ * 92
2
OLOAD* 93
1
dLOAD 94
OLOAD* 95
1
Meaning
Input signal unstable
Err01 (oil pressure)
Manual zeroing outside range
Err04 (oilpressure)
AD signal too high
Err06 (of oilpressure sensor)
Input signal unstable
Err11 (moment sensor)
Zero tracking out of range
Manual zeroing outside range
Err14 (moment sensor)
Compensated zero out of range
AD signal too high
Err16 (of moment sensor)
Connection error of the oilpressure
sensor
Connection error of the moment sensor
Underload
Overload on maximum weight
Dynamic overload
Overload on maximum moment
Action
Service call
Press CE‐key Try
removing the
weight from the forks
before using the zero
key. If there is no weight
on the scale contact
your service dealer
Service call
Service call
Check P049 of
moment settings
Service call
Press CE‐key Try
removing the
weight from the forks
before using the zero
key. If there is no weight
on the scale contact
your service dealer
Increase P019 an/or
P020 or perform a new
zero calibration
Service call
Service call
Service call
Lift the forks from the
ground
Remove the weight
from the forks
Reduce weight on the
forks or omit impacts
Remove the weight from
the forks or replace the
weight
more to the vertical
part of the forks
MANUEL D'INSTALLATION– RAVAS-SafeLoad 35