Control Panel; Power Led; Batt. Led - Seiko Epson TM-P60 Manuel D'utilisation

Unpacking
The following items are included for the standard specification printer. If any item
is damaged, contact your dealer.
Printer
Roll paper
Battery pack (LIP-2500) and its User's Manual
AC adapter (PS-10)
User's Manual (this manual)
Control Panel (LEDs and Switches)
See illustration

POWER LED

On Power is on.
Off Power is off.
Flashing The printer is in power-off operation or is in an area where wireless communication
is not possible.
Printer Condition
Power On
Power Off, battery
installed, and AC
adapter connected
Printer Condition
Power On and
battery installed
Power Off and
battery installed
Buttons
POWER
Press the button to turn the power on or off. To turn off the power, you need to
hold the button for more than 2 seconds.
FEED
Press the button to feed paper.
B
.
ERROR LED
On Printer is offline (paper out, power-on initialization, roll paper cover
open, power-off operation, or when the battery is used to supply
the power, the remaining battery charge is not enough for printer
operation).
Off Printer is online.
Flashing The temperature of the printer is too high. The printer resumes
printing automatically when the temperature returns to normal.
On Indicates that an abnormality occurred during battery charging.
The battery must be replaced with a new one.
Off Battery is being charged. (BATT. [battery] LED is on.)

BATT. LED

On Remaining battery charge is not enough. It must be fully charged.
Off Remaining battery charge is adequate.
Flashing Remaining battery charge is below half.
On The battery is being charged.
Off The battery is fully charged.
Meaning
Meaning
Meaning
TM-P60 with Peeler User's Manual 7
English