SLV COLOR CONTROL SYSTEM Instructions D'utilisation page 7

Assignment to COLOR CONTROL Master Controller 470671 / COLOR CONTROL COLO Master Bulb
470676 / LIPSY ... M COLOR CONTROL Master 133749, 133759
1. Switch the master unit dead for at least 5 seconds. Turn on again afterwards.
2. Within the next 5 seconds push the buttons Speed and White only simultaneously.
3. Within the next 5 seconds push the off/on button for 3 seconds.
The master unit may be controlled by the remote control now.
Assignment to COLOR CONTROL Wall Panel 470670
1. On the wall panel push simultaneously the buttons Speed and White only.
2. Within the next 5 seconds push the off/on button on the wall panel.
3. On the remote control push simultaneously the buttons Speed und White only.
4. Within the next 5 seconds push the off/on button on the remote control for 3 seconds.
The wall panel may be controlled by the remote control now.
22.01.2016 © SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0 Technical Details are
subject to change.
COLOR CONTROL