Toolland DTB10001 Mode D'emploi page 6

4. Connect the charger to the mains. The LEDs indicate the battery is charging.
When all LEDs burn, the battery is fully charged. Disconnect the charger from the
mains to avoid overcharging.
6. Operation
1. Open the cap.
2. Pour the liquid into the tank.
3. Close the cap.
4. Switch on the pressure sprayer.
5. Press the trigger to release the spray.
6. Turn the spray nozzle to adjust the spray width.
a
b
c
x
V. 01 – 25/03/2020
on-off switch
LEDs
hose
direct spray
DTB10001
d
e
f
z
6
tank
lance
nozzle cap
wide spray
©Velleman nv