Oceanic OCEARTT90WP Guide D'utilisation page 55

b) Plug the unit into a properly installed, properly grounded, wall
outlet. Never cut or remove (for any reason) the (ground) wire of
the power cord.
Any questions regarding power or grounding should be directed to
an accredited electrician or a center authorized to work on this type
of product.
WARNING: If the grounded plug is used improperly, there may be a risk
of electric shock!
WARNING
The socket of the installation must always be provided with a connection
to the ground. If the power supply is not connected to ground, you must
not connect the device.
WARNING: Do not put water on the refrigerator as it may cause
equipment failure or risk of electric shock.
TEMPERATURE INDICATOR
To ensure temperatures in this area, be careful not to change the
positioning of this shelf. In refrigerators with forced air (equipped with
a fan or No Frost models), the symbol of the coldest zone is not
represented because the temperature inside them ishomogeneous.
Installing the temperature indicator
To help you adjust your refrigerator, it is equipped with a temperature
indicator that will control the average temperature in the coldest area.
CAUTION: This indicator is intended to work only with your
refrigerator, be careful not to use it in another refrigerator (in fact, the
coldest area is not the same), or for any other use.
The symbol opposite indicates the location of the
coldest zone of your refrigerator: this zone is delimited
at the bottom by the window of the vegetable crisper,
and at the top by the symbol or the shelf positioned at
the same height.
EN-20