Frank FNE 905 I XS LED Mode D'emploi Et Installation page 10

Air outlet – Recirculation Version
• Insert the Connector extensions 14.1 into the side
of the Connector 15.
• Insert the Connector 15 into the Support bracket
7.3 and fix it with the screws.
• Fasten the Support bracket 7.3, fixing it to the up-
per part with the Screws.
• Make sure that the Connector extensions outlet
14.1 is in correspondence with the Chimney open-
ings both horizontally and vertically.
• Join the Connector 15 to the Hood canopy outlet
using a rigid or flexible pipe ø¸150 mm, selection
of which is at the discretion of the installation
technician.
• Make sure that the Activated charcoal odour filter
has been fitted.
Application of Novastick Tape
• Apply the Novastick tape 16 to the front edge of
the Upper Chimney from the top part down to the
start of the Lower Chimney.
EN
12c
14.1
15
7.3
12e
7.3
1
10