riptunes CDB-232BT Mode D'emploi page 10

Both the PROGRAM and PLAY/PAUSE Indicator Lights will be
ON.
7. Stop programmed playback by pressing the STOP button twice.
The PROGRAM Indicator Light turns OFF.
Playing Music Through Auxiliary input Jack
You can also play media from other non-Bluetooth devices using
the auxiliary input jack. Plug one end of a 3.5mm stereo audio cable
into the Boombox AUX-IN JACK (1), and the other end into your
external device.
Note: The Boombox automatically stops any Bluetooth, CD, or
Radio playback when you plug the audio cable in.
Use the controls on your device to control all playback.
Unplug the audio cable to resume Bluetooth, CD, or radio playback.
Playing the Radio
To play the radio:
1. Set the Function switch to Radio.
2. Set the Band switch (4) to AM, FM, or FM.ST.
3. The Radio automatically begins playing.
4. Adjust the Tuning Knob (5) to select the desired radio station.
5. Adjust the antenna for best reception.
Note: We suggest you turn the Boombox off when not in use to avoid
unnecessary energy consumption.
10