Specifications - HACH LANGE sensION+ PH1 Manuel Utilisateur

1. Specifications

Subject to change without notice.
Specifications
Display
Keypad
Measuring ranges
Resolution
Measuring error (± 1 digit)
Reproducibility (± 1 digit)
Temperature compensation
Calibration standards
Input impedance
Dimensions of the measuring instrument and ambient conditions
Operating temperature
Storage temperature
Ambient conditions
Weight
Size
Additional technical data
Energy management
Type of protection
Power supply (batteries)
Conector
Warranty
Warranty
sensION+ PH1_HACH_LANGE_0710.indd ANG:3 sensION+ PH1_HACH_LANGE_0710.indd ANG:3
Liquid crystal, backlit, with pictograms
Membrane, 5 keys
pH –2.00 to 19.99
mV ± 1400
Temperature –20.0 to 150.0 °C (–4.0 to 302.0 °F)
pH 0.01
mV 1 (0.1 mV from –199.9 to 199.9 mV)
Temperature 0.1 °C (0.1°F)
pH ≤ 0.01
mV ≤ 1
Temperature ≤ 0.2 °C (≤ 0.4 °F)
pH ± 0.01
mV ± 1
Temperature ± 0.1 °C (± 0.1 °F)
With built-in Pt1000 temperature sensor
pH: 2.00, 4.01, 7.00, 9.21, 10.01 (at 25 °C)
Redox: 220 mV (at 25 °C)
> 10 12 . The switch from high to low impedance is made in the electrode
connector.
0 °C to 50 °C (32 °F to 122 °F)
–15 °C to 65 °C (5 °F to 149 °F)
80% relative humidity (non-condensing)
300 g
186 x 73 x 38 mm
Automatic power off after 5 minutes of inactivity
IP 67
3 x 1.5V, type AA batteries
Autonomy of over 500 hours
MP-5, five-contact multipin
2 years
3
7/9/10 15:40:31 7/9/10 15:40:31