Instructions For Periodic Maintenance; Service, Spare Parts And Guarantee - Makita UC 3000 Manuel D'emploi Et De Sécurité

Instructions for periodic maintenance

To guarantee a long life and to prevent damages the maintenance works described in the following must be regularly performed.
The product guarantee will automatically invalidate if these works are not carried out regularly and according to the instructions.
The user of the electric chain saw is not allowed to perform maintenance works which are not described in the instruction manual.
All other works must be carried out by a MAKITA service center.
General work
Each time before putting
the saw into operation
After each shutdown
Storage

Service, spare parts and guarantee

Maintenance and repair
The maintenance and repair work of modern electric motors as well as all safety related assemblies require qualified technical
training and the availability of a special workshop equipped with special tools and testing devices.
We therefore recommend you to consult a MAKITA service center for the performance of all work not described in this instruction
manual.
The MAKITA service centers are provided with all the necessary equipment and skilled and experienced personnel to work out correct
customer solutions and to advise you in all matters accordingly.
Please contact the general agent or importer indicated on the back cover of this Instruction Manual, who will gladly provide you with
the address of your nearest MAKITA service center.
Spare parts
A reliable and continuous operation as well as the safety of your chain saw is also subject to the quality of the spare parts used.
Use original MAKITA spare parts only, marked:
Only original spare parts and accessories guarantee the highest quality in material, accuracy to size and function.
Original spare parts and accessories can be obtained from your local dealer. He will also have the relative spare part lists to
determine the required spare part numbers, and will be constantly informed about the latest improvements and also about spare
part innovations.
Please, take in mind that in the case that foreign spare parts are used instead of the original MAKITA spare parts this will automatically
invalidate the MAKITA product guarantee.
Electric chain saw
Plastic case
Saw chain
Guide bar
Sprocket
Chain brake
Saw chain
Guide bar
Chain lubrication
Chain brake
Power switch
Power supply cable
Oil tank cap
Guide bar
Chain carrier
Chain oil tank
Saw chain/guide bar
Electric chain saw
Regularly clean the outside.
Check for cracks and ruptures. In case of damage have it
immediately repaired at a service center.
Resharpen regularly.
Replace in time.
Turn over after a certain period of time so that the bearing
surfaces are uniformly worn.
Replace in time.
Have it replaced in time at a service center.
Have it inspected regularly at a service center.
Check for damage and sharpness.
Check the chain tension.
Check for damage, and remove burrs if necessary.
Functional check.
Functional check.
Functional check.
In case of damage have it replaced at a service center.
Check for tightness.
Clean the oil inlet bore.
Clean, especially the oil guide groove.
Empty.
Demount, clean and lubricate slightly.
Clean the guide groove of the guide bar.
Store safely in a dry place. After a long storage time, have
the electric chain saw checked at a service center (resi-
dual oil can become resinic and the valve of the oil pump
clogged).
Page
14-15
9
12
12
11
11
15
10
17