Care And Maintenance - Gong CHIP Série Guide De L'utilisateur

CARE AND MAINTENANCE

• After each use, rinse your Board with fresh water with the Valve closed and let it dry before putting it in its bag.
• Make sure sand can never get into the Valve or Board. This could cause damage.
• The long-term storage of your Board must be done in a clean, dry place.
• In order to ensure the longevity and the good functioning of your Pump, do not hesitate to check from time to
time the lubrication of the piston inside your Pump by adding silicone grease if necessary.
• The successive inflation / deflation of your Board can have an influence on the tightness of the of the inflation
valve. You will find in the repair kit a Black Key that will allow you to check the tightness of the valve of
your board. Do not hesitate to carry out this check
regularly.
• Never get on the Board when it is not on the water
with the Fin installed : the fins and their Boxes are
fragile to misuse The warranty will not apply under
any circumstances.
• Despite all your precautions, and the solidity of the
PVC, it is possible that you manage to pierce your
Board on a very sharp rock for example. The PVC
Patch that comes included in the product is there
for any possible repairs that you need to make. The Marine grade PVC Glue need for the job can be found at
any hardware store or specialty boat shop.
TIPS SPECIFIC TO STAND UP PADDLE PRACTICE
• To row standing, place one foot on each side of the
center carry handle, facing the nose of the Board.
Keep your back straight, and keep your legs soft to
cushion the chop and keep your balance.
• Hold your Paddle with the blade facing forward.
One hand must hold the handle, the other the
handle.
• Choose a Paddle that is the right size for your
practice.
CHOOSE YOUR PADDLE RIGHT
EN
SURFING
Choose a
paddle cut to
your size.
- 14
CRUISING
Use a Paddle
of your size
+10cm /
+15cm.
RACING
Use a paddle
of your size
+15cm /
+20cm.