Vogue CD564 Mode D'emploi page 2

EN
Setup
1. Position the appliance on a flat, stable surface.
2. Adjust the feet of the appliance to make it level, use a spirit level if necessary.
It is important that the scale is level to ensure accuracy.
Features
To enter the features mode:
• Press the ON/OFF button such that the scale is switched OFF.
• Press and hold the HOLD button then press the ON/OFF button whilst keeping the HOLD button
depressed. Release both buttons, the display should show either "A_ON" or "A_OFF".
To allow the scale to switch off automatically:
• Press the ZERO/TARE button and the display will cycle between "A_ON" (automatic switch off is On)
and "A_OFF" (automatic switch off is Off).
To have the display backlight On:
• Press the HOLD button, the display should show either "L_ON" or "L_OFF".
• Press the ZERO/TARE button and the display will cycle between "L_ON" (backlight On) and "L_OFF"
(backlight Off).
Note: The HOLD button will cycle between the Auto Switch Off and Backlight
functions.
Once complete, Press the ON/OFF button to save the settings.
2
CD564_ML_A5_v7_20210719.indb 2 CD564_ML_A5_v7_20210719.indb 2
Low battery indicator
ZERO indicator
Hold indicator
Press to turn ON or OFF
Press to HOLD reading
Press to alternate between
Metric (kg) and Imperial (lb)
Press to Tare (set the scale to
zero).
Stable reading indicator
2021/7/19 16:38 2021/7/19 16:38