HIKOKI ML 34SR Instructions De Montage page 8

en
SAFETY INSTRUCTIONS
 Disconnect the machine from the mains
power supply
assembly and maintenance work.
 The machine must not be operated before
assembly work has been completed.
 Use the machine only in perfect working
order.
 Do not deactivate safety and protection
devices
 The machine must not be operated if the
operator is under the infl uence of alcohol,
drugs or medication.
 Children, or other people who are not
familiar with the operating instructions, are
not allowed to use the machine
 Observe local
minimum age requirements for operating
the machine.
 Keep others away from dangerous areas.
 Do not leave the appliance unsupervised.
MAINTENANCE AND STORAGE
 Ensure that all nuts, bolts and screws are
tightened and that the machine is in a safe
operational state.
 Let the motor cool down before storing the
machine in a closed room.
 Regularly check the grass catcher for wear
or loss of functional capability.
 Exchange worn or damaged parts for safety
reasons.
Spare parts and accessories
 Only original spare parts and original
accessories may be used.
ASSEMBLY
Scope of supply
 1x Handing instructions
 1x Assembly instructions
 1x Upper handle bar
 1x Lower handle bar
 1x Upper part of grass catcher
 1x Lower part of grass catcher
8
before commencing
regulations regarding
 2x Screws of bag (Ø4.8x13)
 2x Screws of handle (Ø3.5x14)
 2x Wing nut set
 2x Clamp
 1x Rod
 2x Mount
 1x Holder
Assembly sequence
See photos of assembly instructions.
Assembly of the bars
Mounting of lower handle bar to the
housing (1)
1 Insert lower handle bar into the cut-outs up
to the end stop and secure on each side
with screws Ø4.8x13
Mounting upper handle bar to the lower
handle bar (2)
1 Secure upper handle bar to lower handle
bar wing nut set, each side
Mounting bearing parts to upper handle
bar (3)
1 Push on Mount on both side.(3a)
2 Push on Holder and insert rod.(3b)
3 Affi x clamp for fi xing cable.(3c)
Assembly of grass catcher
Assembly of grass catcher parts (4)
1 Attach upper part to the pins of the lower
partof the catcher.
Securing of the grass catcher parts (5)
1 Fold both parts of the grass catcher together
and secure with 2 screws Ø3.5x14.
Removing the mulching kit (6) (only
ML40SR)
1 Lift the baffl e plate
2 Pull out the mulching kit.
3 Store the mulching kit for future use.
Maintenance and storage