Important - Blueair HealthProtect 7400 Série Manuel Utilisateur

Masquer les pouces Voir aussi pour HealthProtect 7400 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Filters
The air purifier is delivered with two pre-filters and one SmartFilter installed. The filters purify
the air from both particles and gases. For best performance, clean the pre-filters regularly
and change the main filter when the air purifier indicates filter change. To find the correct
main filter for your air purifier, use the Blueair app or visit www.blueair.com.
The model number of your air purifier can be found on the rating label on the air purifier.
Blueair filter subscription program
Use the Blueair app or visit www.blueair.com to sign up for the Blueair filter subscription
program. (Not available in all markets)

Important!

Always turn off and disconnect the appliance from the power supply before
changing filters, cleaning or carrying out maintenance procedures.
Clean the pre-filters
For best performance, clean the pre-filters regularly.
Step 1
Push the left or right side
frame indent of the air
purifier to release the
pre-filter.
Step 3
Clean the pre-filter, by
wiping with a dust cloth
or vacuuming with a soft
brush attachment.
Step 5
Push the pre-filter to lock
it in position.
Step 2
Pull out the pre-filter from
the slot.
Step 4
Place the pre-filter back
into the slot.

Publicité

Table des Matières
loading

Table des Matières