Installation Instructions; Unpacking; Positioning The Appliance - Important Considerations - IMC F90/010 Manuel D'installation

Installation Instructions

Unpacking

IMPORTANT - Provisions for lifting and carrying should be made as this product weights over 18kg (40
lbs)
Remove the appliance from its packaging.
Positioning the appliance – Important Considerations
Leg Adjustment
Prior to installation ensure that you have the appropriate size under-counter space. Please see "Product
Dimensions and Clearances" on page 5 for further details.
Slide the appliance next to the designated under-counter space and measure the distance that the legs will
need to be adjusted in order to elevate the appliance to the correct height for your worktop/counter.
To reduce or increase the leg height, simply loosen and spin the leg. Adjust the legs to just short of the
proposed height so that the appliance will slot into the allocated space easily. You might want to consider
using a lever under the appliance to lift it up, or a G-clamp to hold the top of the appliance under the
worktop/carcass. Plug the appliance into the electrical socket (switched on) and slide it into the space.
Door allowance
MOST IMPORTANT - When positioning the appliance into the space it is imperative to make appropriate
allowance for the thickness of the door. The front fascia of the appliance must not be set too far back. Any
gap between the front fascia of the appliance and the closed door will prevent the safety micro switches from
connecting preventing operation of the appliance. Ensure the appliance is set far enough forward within the
under-counter space so that the door shuts tight against the appliance front fascia and also flush with any
surrounding cabinetry.
Ensure that you test the micro switches once you have fitted the door and BEFORE you permanently anchor
the appliance. To test the micro switches open and close both the main door (with Main Collection Bin cage
attached) and Can Collection Drawer (Models F90/030, F90/035) listen carefully for a double click of the micro
switches when you close the door/drawer.
Worktop clearance for removal of the Main Collection Bin
During installation of the appliance you will need to assess the ease by which the Main Collection Bin can be
removed. This is particularly relevant where a work surface (including any grab rail attached to the work
surface) overhangs the appliance. The closer the top of the appliance to the work surface, the more acute the
angle is in order to remove the Main Collection Bin. To avoid problems in removal of the Bin and or its
contents, it is recommended that the work surface (including any grab rail) does not overhang by more than
20 mm.
8