ELECTROCOMPANIET EMC 1 Mode D'emploi page 7

1
For maximum performance, the
EMC 1 must be level.
Place the CD Player on a level
plane surface. Make all
connections on the rear panel.
2
Unscrew the Allen screws
holding the gold sign marked
"Mechanical Cancellation
System" with the small Allen key.
Loosen the transport fixing
screw that is located underneath
the gold sign with the large Allen
key. Unscrew it counter
clockwise. Put the gold sign
back and tighten the small Allen
screws.
Important!
Keep the Allen keys and spirit level in a safe place for future use.
Always tighten the transport screw when moving the CD Player.
The damping scales in the EMC 1 weigh eight kilograms.
If not securely fastened, the CD Player will be severely damaged, resulting in void of warranty.
Do not over-tighten the transport screw.