the dangers associated with its use. Children
must never be allowed to play with the
device. Cleaning and user maintenance must
not be carried out by children under 8 years
old or without supervision. Children younger
than 8 years of age should be kept away
from the device and the connection cable.
Extreme caution is required when a device is
used in the vicinity of children and when it is
left unattended.
BEFORE FIRST USE:
Inserting the batteries
• The battery compartment is located at the lower end of the device.
• To access the battery compartment, pull the handle out completely, press
the yellow battery symbol, and pull apart (Figure 1).
• After pulling apart, turn the battery compartment cover anti-clockwise to
open (follow the arrow marking)(Figure 2).
• Insert 2 x AA batteries in the battery compartment in the correct orientation.
Insert the positive terminal of each battery first.
• Close the battery compartment by pressing the cover and turning it
clockwise until it clicks into place.
• Place the handle back on the device by aligning it with the grooves (Figure 3).
• When it reaches the locked position, press the yellow battery icon and slide
it until it closes completely (Figure 3).
• Always purchase and use the correct size and type of battery for the intended use.
M29227_MicrotouchTitaniumTrim_Manual_20210923_CP.indd 7
M29227_MicrotouchTitaniumTrim_Manual_20210923_CP.indd 7
• Never mix old and new batteries.
• Pay attention to the polarity (+ and -) when inserting the batteries. The
device will NOT work if either battery (or both batteries) is/are not inserted
correctly.
• Remove batteries from the device if it will not be used for an extended period
of time.
• Never mix old and new batteries.
• Never mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium or nickel-metal hybrid) batteries.
USING THE MICROTOUCH® TITANIUM TRIM™
Select the right styling attachment
• To choose the right attachment, place all 4 styling attachments so that you
can see and compare their lengths.
• Each attachment indicates the length of hair that remains after trimming
(2mm, 6mm, 13mm, 19mm, 25mm).
• Slide the open end of the styling attachment over the blade head until it
clicks into place (Figure 4).
• To remove a styling attachment, hold the device firmly, and tilt the
attachment slightly to the side and upwards at the same time (Figure 5).
NOTE: The 25 mm attachment is different from the others.
• Only use the 25 mm attachment when cutting with the guide edge against
your head.
• You may have to hold the device in the other hand when changing directions.
• In order to properly lift the hair, the 25 mm attachment has only one guide
edge (Figure 6).
• The other 3 attachments and the Blade Guard can be used with either side
placed against your head.
CUTTING/TRIMMING YOUR HAIR OR BEARD
With a styling attachment
• For best results, only use the device on dry hair, after combing or brushing
7
23.09.21 10:53
23.09.21 10:53